Logo
  • TIRES
  • FAQ
  • GaryHoosierMan@aol.com
  • WARRANTY
  • HOME
    Logo    

GaryHoosierMan.com, your Hoosier Tire dealer will MATCH ANY CURRENT ADVERTISED PRICE ON IN-STOCK ITEMS!

Gary Landgrebe welcomes you to GaryHoosierman.com - your authorized dealer of Hoosier Tires - the tires of champions which includes the following racing tire products: Drag Front Runners Tire, Drive Tires/Slicks, D.O.T. Drag Radials, Quick Time D.O.T, Quick Time Pro D.O.T, Racing Tubes and Liners, JR Dragster Tires, Racing Apparel, Racing Accessories, Hoosier Racing Tires - "Tires Designed for Champions".

Due to all the different tire compounds and drag tire sizes, we at GaryHoosierMan.com want to make sure you are ordering the right tire product. Although you might think you know what you need, a mistake can be made. GaryHoosierMan.com has the professional knowledge that can eliminate a costly mistake. PLEASE CALL 1-217-652-0707 for some friendly advice! We want to help you, not just make a sale.

Did you know Hoosier tires are well known across the country for their success in drag racing? Also, Hoosier slick is run by a good percentage of Sportsmen and Bracket racers. Not only are Hoosier drag tires fast, but they also last longer than most other tires, so you get more passes out of them. What more can you ask for from a drag tire? Hoosier drag racing tires are available for front and rear applications in a variety of sizes, and in your choice of compounds to suit your driving style or track condition.

FYI: * We carry a full line of Hoosier drag tire race products. * All tires have matched roll-out or we don't sell them. * Hoosier drag tires are not a directional tire. * All tires should not be stored in direct sunlight, around welding areas, in overhead garage areas where the temperatures may reach 100 degrees F or higher, or around high voltage electric motors. They also should not be allowed to get wet and freeze.

QUESTIONS:

  1.  How do I purchase a Hoosier Race Tire?
  2.  What is the proper burn out procedure for Hoosier drag tires?
  3.  What is the number written on my bias race tire in yellow chalk?
  4.  I use a Hoosier (slick) drag tires and have noticed what appear to be "X's" appearing
       across the contact portion of the tread surface, what is this and should I be concerned?
  5.  Can I swap tires from side to side? (from left to right and right to left)
  6.  Should I use "tubes" in slicks and DOT drag tires?
  7.  If my tires are "feathering or balling up" across the tread what should I do?
  8.  What might cause uneven wear on the outside or middle of the tread?
  9.  What is normal wear for a drag tire?
10.  How do I get Hoosier decals for my race car?
11.  Does it matter which direction I mount my Hoosier RACE TIRES?
12.  What are the do's and don'ts when storing Hoosier race tires at the end of the racing season?


ANSWERS:

1. How do I purchase a Hoosier Race Tire?

ANSWER
: Hoosier Race Tires are purchased through our extensive distribution network of distributors and dealers. Email me or call anytime. We look forward to doing business with you! (Top)

2.  What is the proper burn out procedure for Hoosier drag tires?

ANSWER:
With Hoosier's "high traction" compounds, we have found the following burn out procedure to work for most cars. We recommend rolling through the water box to wet the tires. Start the burn out. Once the tires start to "haze", start to slow the burn out down and proceed to the start line. The goal of the burn out is to clean all debris off the tires and heat the just the surface of the tread.

Again this procedure will work for most cars, but fine tuning the procedure for your car may be needed. (Top)

3. What is the number written on my bias race tire in yellow chalk?

ANSWER:
As a result of a tire being bias in design (as opposed to radial), it will have a circumference that varies from tire to tire. This is not something that is unique to Hoosier but is common to all bias tire manufacturers. However, Hoosier has went to the expense of placing a "chalk-mark" on its bias ply tires in an attempt to assist the consumer in making the proper selection when purchasing new tires. It is something Hoosier does that our competition does not. Now, to understand its use, you need to understand a little of the manufacturing process as well. After a tire is cured, it is removed from the press and placed on a machine called a "post-inflator". On this machine each tire has air injected into it for a set period of time. The amount of air is determined by our engineering department and is not the same for every type of tire Hoosier produces.

After a set time period, a tire is then measured and the circumference is recorded. Then a press operator writes the size on the side of treaded tires and on the tread of slicks, in yellow chalk. All Hoosier bias ply tires with a chalk-mark, follow this same process.

Now, how should the chalk mark be interpreted? It should be viewed as a reference point or a guide on purchasing tires by size to attempt to attain a certain stagger. Say for instance, you needed to replace your right front tire. Your car currently has 1" of stagger (with the RF @ 28 p.s.i.) but you want to get 1 1/2" of stagger. The tire you were replacing had an original chalk mark of 86", and had a roll out, of say, 85". Obviously, you would want to purchase a tire bigger than the 86" tire you removed. Most likely, a tire with a chalk-mark of 86 1/2". You have to remember there are many factors that go into what size a tire will actually measure. The ambient temperature that day, the air pressure in the tire, whether the tire is new or old. These are factors that no, one person, controls. You just need to be aware of their existence and work with what you know. The chalk mark does not tell you the circumference of the tire at running pressure, it does not tell you how big a tire will grow to, it tells you that a tire is either going to be bigger or smaller than another one with a different chalk mark. It's just that simple. Bias ply tires, by nature, are going to vary in size, whether you buy a Hoosier or the competition's tire. By keeping good records, using common sense and understanding how the chalk-mark Hoosier tires provide, you will be step ahead in selecting the proper sized tire(s). (Top)

4.  I use a Hoosier (slick) drag tires and have noticed what appear to be "X's" appearing across the contact portion of the tread surface, what is this and should I be concerned?

ANSWER
: This is the "shadowing" effect of the splices within the slick drag tire. All our tires have splices, this is where two ends of the tire cord material is joined together to complete an entire body ply or belt.  This area where the two ends are spliced together is obviously stronger along the splices and as a result deflects differently than areas with no splices and the result is this "shadowing" effect. You see this more on drag tires than other tires due to the softer compounds being used and the fact that the tread is a smooth surface. (Top)

5.  Can I swap tires from side to side? (from left to right and right to left)

ANSWER:
Hoosier does suggest, depending on the number of runs, swapping tires on a regular basis. The main reason for swapping tires is to help smooth out or even the tread wear. By swapping tires, it causes the tire to be run backwards, thus causing the tire to wear differently, which cleans up the tire tread. Watch for improper wear patterns on the tread, such as rolling or feathering. The tread surface should have a fine grain or velvet look to the surface. (Top)

6.  Should I use "tubes" in slicks and DOT drag tires?

ANSWER
: The decision to run tubes is ultimately up to the racer. Hoosier drag tires are capable of safely running without tubes. The Quick Time DOT tires should be run with a tube when the tire is run on the street, but they can be run without tubes at the track. Race tires are inherently susceptible to air leakage due to being built of very light gauge material needed to perform in various racing applications. A decision to use a tube should be based on your application and needs. (Top)

7.  If my tires are "feathering or balling up" across the tread what should I do?

ANSWER
: Rotate tires from side to side to help the tread wear. Irregular wear should dissipate after a couple of runs. Make sure you are using the proper compound for your application. (Top)

8.  What might cause uneven wear on the outside or middle of the tread?

ANSWER
:  You may have had too much air pressure which caused the tire to crown and wear the center of the tread faster than the rest of the tread surface. Having too little air pressure may cause the reverse to occur (excessive wear to the outside of the tread). (Top)

9.   What is normal wear for a drag tire?

ANSWER
: There is no set degree of "normal" wear. If you feel you are getting to much wear, look to shorten the burnout time in the water box. Too much burnout will shorten the tread life of the tires. The softer the compound the more wear you would see given the same amount of burnout time.  Most wear to the tread life of a drag tire comes from too much time in the burnout procedure. (Top)

10.  How do I get Hoosier decals for my race car?

If you send us an e-mail at info@hoosiertire.com, requesting the decals, we would be happy to send them to you free of charge to anywhere in the United States and Canada. Remember to include your mailing address as to where you want them sent. To help defer the cost and avoid waste, in the e-mail please tell us whether you want BLACK decals or WHITE decals. We appreciate your support of Hoosier by displaying our name proudly on your race car. (Top)

11.  Does it matter which direction I mount my Hoosier RACE TIRES?

12.  What are the do's and don'ts when storing Hoosier race tires at the end of the racing season?

TIRE STORAGE : The useful life of a tire, whether mounted or dismounted, is directly affected by storage conditions. Tires should always be stored indoors in a dark, cool, dry room.

DO

1  Remove the tires from the vehicle. 
2. Remove the air from the tires and store them on their side in a cool/dark/dry environment.
3. Place tires in a black plastic bag when stored during the "off-season".
4. Make sure the temperature range in the storage location is between 40-90 degrees Fahrenheit.

DON'T

1. Don't store tires in direct sunlight or near electric motors. (Electric motors emit small amounts of ozone.) Tires need to be protected from light, especially sunlight. Light causes ultraviolet damage by breaking down the rubber compounds. The storeroom should not contain electrical welding or any other equipment that could produce ozone.

2. Don't apply any chemical treatments to Hoosier tires. (It's not necessary and may actually damage the integrity of the tire by breaking down the rubber properties of the tire.) Tires must not be allowed to come in contact with oils, greases, solvents, or other petroleum products that cause rubber to soften or deteriorate.

3. Don't store tires in sub-freezing temperatures for any length of time. (The rubber can freeze and may crack as a result.) (Top)

217-652-0707      garyhoosierman@aol.com

Webmaster, Tippey Designs